How to: Brake Control Module.

View previous topic View next topic Go down

How to: Brake Control Module.

Post by CateraMV6 on 3/8/2010, 23:43

This is a very simple install and takes around 15min to complete.
The result is increased safety and better looks.

The module takes the signal from the brakes and causes the 3rd brake light to flash a number of times before it becomes solid.
The unit allows for the following adjustments.
1. Number of flashes.
2. Speed of flashes.


I have set mine to flash 2 times rapidly, and then becoming lit constantly.

The unit has 3 wires.

White wire is GROUND.
Black wire goes to Tail light.
Red Wire goes to Signal wire.

Basically your 3rd brake light has 2 wires:
Black, Black/yellow.

Black is Ground.
Blk/Yellow is Power 12V +

YOu need to cut the Black/Yellow wire and on the side going to the tail light connect to the black wire from the module.
The other side you connect to the red wire.

The white is gournd and needs to be tapped in the black wire on the car.

Once all connections are done, have someone press the brakes.
Then adjust the 2 adjusters to your preferences.

Here are a couple pics of the installtion.

Notice the Black/Yellow wire can be reconnected and the unit can be removed at any time.

All connected.





Finished Installation


VIDEO


Camera sux BTW it shows 2 flashes and then 3 flashes, but its really 3 flashes all the time...
avatar
CateraMV6

Number of posts : 164
Age : 33
Location : Des Plaines, IL USA
Points : 244
Registration date : 2008-05-06

View user profile http://cateraowners.forumotion.com, Cardomain.com/memberpage/300

Back to top Go down

Re: How to: Brake Control Module.

Post by CateraMV6 on 3/9/2010, 16:27

avatar
CateraMV6

Number of posts : 164
Age : 33
Location : Des Plaines, IL USA
Points : 244
Registration date : 2008-05-06

View user profile http://cateraowners.forumotion.com, Cardomain.com/memberpage/300

Back to top Go down

Re: How to: Brake Control Module.

Post by yomincarr on 3/9/2010, 21:19

looks good, i enjoyed the youtube vids
avatar
yomincarr

Number of posts : 188
Age : 33
Location : North Carolina
Points : 222
Registration date : 2010-02-07

View user profile

Back to top Go down

Re: How to: Brake Control Module.

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum